User ID/Password
Configure user ID and Password.
Status
It shows connection status of DVR.
6.3.2 WRS
If DVR is connected to Cable modem or xDSL modem, IP address is changed at every connection to
ISP. In this case, changed IP address cannot be known. If DVR using static IP register into WRS
server, changed IP address can be known easily when it connects to DVR.
To register Static IP to WRS, please refer the following to set.
WRS Interval
For continuous registry, register interval should be set to ‘WRS Interval’. According to set value of
static IP address, it renews the information in WRS server regularly. If user registers the interval ‘0’ or
DVR does not transmit any data for 2 days, the data is removed from WRS.
To Next Page
Loading...
