shorter than other ATM users. It is to decide the last line of the one data register as final complete data
to save after an hour’s consideration of register later because DVR can not recognize it automatically.
Lines
Define how many lines will be shown.
Caution: external device cannot be recognized, please, ask to the seller.
6.4.5 Serial Setup
DVR has 3 serial ports. One is RS-232 and the other 2 ports are RS-485.
Serial Port
Select the Serial port.
Device
Select the connected device.
Interface
Configure which interface user uses.
COM1 to RS-232C, COM2 is to RS-485, COM3 is to RS-485
Baud rate/Parity/Stop Bit/Data Bit
Input suitable value according to external device.
6.4.5.1 PTZ Setup
Additional configuration for PTZ Address, PTZ Port
To Next Page
Loading...
