4.5.1 System Standard Mode
By [Auto] button, it can monitor auto switching of all channels.
Press [MENU] for the setting switching term or using mouse click menu icon from function menu.
Move to “Device” “Monitor” from OSD menu.
Select “Seq. Switching(sec)” and set value from 1 sec. to 60 sec. At OFF set, auto switch mode does
not operate.
Auto Switch mode can be set in every division mode by the press [Auto] button.
Press [Auto] button once more to leave from Auto Switch mode.
4.5.2 User Sequence Mode
Press [AUTO] button or click [Sequence] icon from Function menu with mouse.
• Auto Switch model can be set from “Monitor” main menu.
To Next Page
