Orion OSD-400 - Internet; Intranet Configuration; Basic Setting; Viewing Image

OSD-400/OSD-800/OSD-1600
Install & User Manual
-
Firmware 3.X
22
2.2.3.4 Internet/ Intranet configuration
2.2.4 Basic Setting
2.2.4.1 Viewing Image
When power is on, DVR starts automatically and displayed in basic 16ch-split screen after booting.
<Reference>
If user password is set, a prompt for entering the password will be appeared. Factory default is
reserved as not responding keypad on DVR front (It is not from factory default).