Overkill Solar BMS Series - LED Enabled; LED Capacity; BMS Name; Barcode

3.4.3 LED Enabled
Not applicable. Our BMS does not have the LED populated.
3.4.4 LED Capacity
Not applicable. Our BMS does not have the LED populated. 

On BMS modules that have an LED, this would blink the capacity out (e.g., 5 blinks would mean 100%
capacity).
3.4.5 BMS Name
Not applicable; has no effect on the behavior of the BMS. However, if the PIN protect option is used within
the iPhone app, it will use the name as a PIN passcode, which could leave you locked out of your BMS. We
recommend to leave this alone, and to not use the iPhone app’s PIN protect function.
3.4.6 Barcode
Not applicable. This does not affect the operation of the BMS. We recommend to keep it at its default value.
3.4.7 NTC Settings
Leave these at their default setting.

12V BMS:


24V BMS:



 