D.1.4 BMS Temp Sensor Connector
Connector type: Don’t know. Use the included temperature sensors. Try not to lose them.
The temperature sensors themselves are 10KΩ NTC (negative temperature coefficient) bead-type thermistors.
Thermistors are not polarized, but the connector can only be plugged in one way.
Appendix E: BMS Application Usage
E.1. XiaoxiangBMS (iPhone)
1. Download the iPhone application from the app store. Link:
https://apps.apple.com/us/app/xiaoxiang-bms/id1375405426
2. Open the app. Ensure that the phone’s bluetooth has not been disabled (Settings -> Bluetooth ->
enable the top Bluetooth radio button)
3. Ensure that your battery pack is fully assembled and operational.
4. The iPhone app communicates via Bluetooth. So ensure that the bluetooth module is present and
plugged in.
5. Open the app. Your BMS should be immediately enumerated in the list of devices found. Click on the
device.
6. The basic info for your BMS should now be displayed.
To Next Page
Loading...