8. Technical Specifications
Performance Characteristics Instruction
Interval( T△ )
accuracy
(DC～100MHz)
Single：
±(1 interval time+100ppm×reading+0.6ns);
Average>16：
±(1 interval time +100ppm×reading+0.4ns)
A/D converter 8 bits resolution (2 Channels simultaneously)
Sensitivity 5mV/div~5V/div
Displacement
±10 div
Analog bandwidth 30MHz
Single bandwidth Full bandwidth
Low Frequency ≥5Hz (at input, AC coupling, -3dB)
Rise time ≤5.8ns (at input, Typical)
DC accuracy ±3%
DC accuracy
(average)
Average﹥16: ±(3% rdg + 0.05 div) for V△
Vertical system
Waveform inverted ON/OFF
Cursor V and T between cursors△△
Automatic
Vpp, Vmax, Vmin, Vtop, Vbase, Vamp,
Vavg, Vrms, Overshoot, Preshoot, Freq,
Period, Rise Time, Fall Time, Delay A→B ,
Delay A→B , +Width, -Width, +Duty,
-Duty
Waveform Math ＋, －, *, / ,FFT
Waveform storage 15 waveforms
Bandwi
dth
Full bandwidth
Lissajous
figure
Phase
differen
ce
±3 degrees
Measurement
Frequency ( typical) 1KHz square wave
Communication
port
USB2.0, USB for file storage; LAN port;
VGA port or RS-232 (Optional);
82
To Next Page
Loading...
