5. Advanced User Guidebook
The description of the Display Set Menu is shown as follows:
Function Menu Setting Description
Type
Dots
Vect
Only the sampling points are displayed.
The space between the adjacent sampling points
in the display is filled with the vector form.
Time
OFF
1 second
2 seconds
5 seconds
Infinity
Turn the M knob to set the persistence time
Persist
Clear Clear the persistence
ON Turn on the XY display function;
Turn off the XY display function.
XY Mode
OFF
ON Turn on the cymometer ;
Cymometer
OFF Turn off the cymometer.
ON
VGA Disp
OFF
Connect the VGA port to a monitor. If set it as
ON, the waveform could be displayed on the
computer monitor.
Display Type: With the F1 menu selection button pushed down, you can shift
between Vect and Dots types. The differences between the two display types can
be observed through the comparison between Fig.5-30 and Fig.5-31.
Fig.5-30 Display in the Vector Form
User Manual of Smart Digital Storage Oscilloscope
45
To Next Page
Loading...
