5. Advanced User Guidebook
How to Save and Recall a Waveform
Press the Save button, you can save the waveforms and settings in the instrument.
The menu displayed in the screen is shown as Fig.5-34.
Fig.5-34 Waveform Save Menu
The description of the Save Function Menu is shown as the following table:
Function Menu Setting Description
Type
Wave
Setting
Choose the saving type (the Record Type
see “How to Record/Playback Waveforms”
on P51)
Image
Record
When the type is Wave, the menu shows as following:
Source
CH1
CH2
Math
Choose the waveform to be saved.
Object 1~15
Choose the address which the waveform is
saved to or recall from.
Object & Show
Show
ON
OFF
Recall or close the waveform stored in the
current object address. When the show is
ON, if the current object address has been
used, the stored waveform will be shown,
the address number and relevant
information will be displayed at the top left
of the screen; if the address is empty, “None
is saved” will be displayed.
Save
Save the waveform of the source to the
selected address. You can also press Copy
button to do it. Storage format is vector.
Storage
Save to internal storage of USB storage.
When External is selected, save the
waveform according to the current record
length (see “Record Length Menu” on P42).
The file will be named according to the
current system time. The waveform file
could be open by OWON waveform
analysis software (on the supplied CD).
Internal
External
When the type is Setting, the menu shows as following:
User Manual of Smart Digital Storage Oscilloscope
49
To Next Page
Loading...
