5. Advanced User Guidebook
Fig.5-55 wave of Freq cursor measurement
How to use Autoscale
The function is applied to follow-up signals automatically even if the signals change
at any time. Autoscale enables the instrument to set up trigger mode, voltage division
and time scale automatically according to the type, amplitude and frequency of the
signals.
Fig.5-56 Autoscale menu
The menu is as follows:
Function Menu Setting Instruction
Autoscale
OFF
ON
Turn off Autoscale.
Turn on Autoscale.
User Manual of Smart Digital Storage Oscilloscope
67
To Next Page
Loading...
