5. Advanced User Guidebook
Fig.5-32 Infinite Persistence Display
XY Format
This format is only applicable to Channel 1 and Channel 2. After the XY display
format is selected, Channel 1 is displayed in the horizontal axis and Channel 2 in
the vertical axis; the oscilloscope is set in the un-triggered sample mode: the data
are displayed as bright spots and the sampling rate is 1MS/s and can not be
changed.
The operations of all control knobs are as follows:
The Vertical VOLTS/DIV and the VERTICAL POSITION knobs of
Channel 1 are used to set the horizontal scale and position.
The Vertical VOLTS/DIV and the VERTICAL POSITION knobs of
Channel 2 are used to set the vertical scale and position continuously.
The following functions can not work in the XY Format:
Reference or digital wave form
Cursor
Time base control
Trigger control
FFT
Operation steps:
1. Press the Display button and call out the Display Set Menu.
User Manual of Smart Digital Storage Oscilloscope
47
To Next Page
Loading...
