Packo RM/IB Series - Table for Levelling Australian LEM Tanks

26/78 06/02/2008
1.00
Table for levelling Australian LEM tanks
Introduction
The table for levelling your LEM milk cooling tank can be found below. In the chapter "Levelling the tank",
you can find how to use the table.
Figure
LR = measuring rod length
LC = inside dimensions milk tank
L = distance between mounting studs of the dipsticks
Table
Type
H2-H1
(mm) 3%
5000
58
6200
88
7000
8000
114
9000
97
10000
130
12000
140
14000
160
15500
166
18000
201
22000
246
25500
278
32000
384
Type = nominal contents of the tank