69/78 06/02/2008
Cleaning phases
First hose the milk residues out of the milk vessel
To guarantee a sufficiently clean tank, clean it in three phases as described below:
Rinse the tank with warm water for 2 minutes.
Clean the tank with hot water and a cleaning agent for 12 minutes. The water temperature
required depends on the type of cleaning agent.
- check the instructions on the drum for each cleaning product
Rinse the tank with cold water for 2 minutes.
Rinse the tank a second time with cold water for 2 minutes. (If applicable use a desinfectant)
To Next Page
