Palm Tungsten Tungsten C User Manual

Going beyond the basics
255
If you are using the Palm VersaMail HotSync Conduit and have an IMAP
account, you must configure the outgoing mail settings to send mail.
To set outgoing mail server (SMTP) settings:
1. On the Server Settings screen, tap Details.
2. Tap the Options pick list and select Outgoing Mail.
3. Enter any of the following:
Deleted Mail
(IMAP only)
Stores deleted e-mail in the folder you specify on the server.
This field is case sensitive, so spell the folder name exactly as
it is on the server. For example, if your Deleted Mail folder is
called Trash on the server, you must enter Trash in this space.
Sent Mail (IMAP
only)
Shows the name of your Sent Mail folder on the server. This
field is case sensitive, and the folder name should be spelled
exactly as it is on the server
.
Display Name
Enter the name you want to appear on your outgoing
messages, such as “Joe Smith.”
Reply To Address
Enter the e-mail address that you want recipients to see and
reply to on your e-mail messages, only if it is different from
the e-mail address from which you are sending the message.
For example, if you are sending a message from
me@yahoo.com but you want recipients to reply to
me@earthlink.net, enter the reply-to address here. Reply To
Address makes it look like the e-mail came from the address
you entered.
BCC
Select the BCC check box to send a blind copy of any e-mail
message you send to another e-mail address. The blind copy
e-mail address is not seen by the other recipients of the
message. For example, if you want a copy of all messages
you send from your handheld to be sent to your desktop
e-mail account, enter that e-mail address.

Palm Tungsten Tungsten C Specifications

General

Brand	Palm
Model	Tungsten Tungsten C
Category	Handhelds
Language	English