3D Signal Recording and Playback: Connections
39
3D Signal Recording and Playback
Connect the master and slave units as illustrated.
With these connections, setting the units to 3D
REC/PB mode enables recording and playback of
3D video clips.
Press the REC and PLAY buttons on the master
unit to record the input signals as a Dual P2 3D
clip.
Also, a reference signal can be applied to the
slave’s REF IN jack to synchronize playback with
an external system.
◆ NOTE:
• Be sure to correctly connect the left and right
input and output signals. Reversed left/right
connections produce a reverse-vision condition
that can cause asthenopia or eyestrain.
Connections
Recording Connection Example
An input reference signal
can be connected to the
REF IN jack on the slave.
AG-3DA1 or equivalent
HD-SDI
(Left eye image)
HD-SDI
(Right eye image)
AG-HPD24 (Slave/3D-R)
AG-HPD24 (Master/3D-L)
ASync Signal
BLINK
(USB)
C LINK (D-SUB)
Master
(L) Jack
Slave
(R) Jack
Remarks
A REF IN VIDEO
OUT
BNC cable
B LINK (M)
USB
Type A
LINK (S)
USB
Type B
USB 2.0 cable
C LINK (D)
9P D-SUB
LINK (D)
9P D-SUB
RS-422A-
compliant cable,
Length 1 m or
less
To Next Page