To Next PageTo Next Page
Need help?Do you have a question about the Panasonic AG-HPD24E and is the answer not in the manual?
Crucial safety guidelines and warnings for initial setup and operation.
Regulatory information and compliance statements for USA and Canada.
Specific procedures for handling used batteries in Brazil.
Important safety instructions for the proper and safe use of the unit.
Crucial safety guidelines and warnings for initial setup specific to AG-HPD24E.
Safety instructions concerning the AC power cord for both charger and adaptor.
Details on applicable EMC standards and the required operating environment.
Conditions for achieving compliance with EMC standards, including equipment and cables.
Information on compatible batteries, their characteristics, and removal procedure.
Definitions of essential terms and explanation of page referencing.
Precautions related to handling, environment, and protecting the unit from damage.
Precautions for using the AC adaptor and battery, including characteristics.
Information on compatible storage media and necessary pre-operation setup.
Lists and descriptions of all included and optional accessories.
Detailed explanation of physical controls, slots, ports, and indicators on the unit.
Step-by-step guide for charging the unit's battery pack.
Instructions for installing and removing the unit's battery.
Instructions for connecting and disconnecting the AC power adaptor.
Procedures for powering the unit on and off, including status indicators.
Instructions for setting the unit's internal clock and managing auto power-off.
Information about P2 card usage, insertion, status indicators, and removal.
Details on recording time capacities for P2 cards and clip division.
Procedures for copying clips, preventing deletion, and repairing/reconnecting clips.
Guide to navigating and using the unit's menu system for settings and operations.
Instructions for adjusting the LCD monitor's timeout, backlight, color, brightness, and contrast.
Steps to access and view the thumbnail screen for managing clips.
Procedures for recording video and audio clips onto P2 cards.
Instructions for playing back recorded clips from P2 cards.
Explanation of time code, user bits, and CTL functions and how to set them.
How to use USB Device Mode for PC connection and USB Host for external storage.
Operations for viewing and managing 3D clips and thumbnails in REC/PB mode.
Diagrams and details for connecting units for 3D recording.
Steps to select and enable the 3D recording and playback mode.
Procedures for powering the unit on and off when in 3D REC/PB mode.
Specific instructions for initiating and managing 3D recording.
Procedures for playing back 3D clips in different modes and from various screens.
How to view and interpret 3D thumbnails and their associated information.
Connection diagrams and steps to select the synchronous playback mode.
Guidelines for ensuring proper synchronization when playing back clips across multiple units.
How to play back clips when the thumbnail screen is not displayed.
How to play back clips directly from the thumbnail screen interface.
A detailed breakdown of menu options, settings, and their functions.
General specifications including voltage, power consumption, dimensions, and mass.
Technical details related to digital video recording formats, sampling, and compression.
Technical specifications for digital audio and other interface types.
Technical specifications for the AC adaptor and battery charger.
An alphabetical listing of topics and their corresponding page numbers for quick reference.
Environmental information on proper collection and disposal of electronic waste and batteries.
Introduction to the advanced operations covered in Volume 2 of the manual.
Definitions of essential terms and explanation of page referencing.
Overview of the different operating modes of the unit and their functions.
The main screen interface for recording and playback operations.
Detailed steps for recording audio and video clips onto P2 cards.
Explains different recording methods like hot swap, loop, VFR, and auto recording.
Instructions for playing back recorded clips from the unit.
Diagram illustrating speed adjustments and transitions during playback.
The interface for browsing, managing, and playing back recorded clips via thumbnails.
How to customize the thumbnail screen display for better efficiency and viewing.
How to choose which clip properties are shown in a simplified display.
Detailed steps for playing back selected clips from the thumbnail screen.
How to select and deselect clips for processing on the thumbnail screen.
Procedures for copying clips to P2 cards or external storage devices.
Steps to restore damaged clips and rejoin clip segments.
How to view and edit detailed information and meta data associated with clips.
How to change thumbnails and attach meta data during recording.
Configuring meta data attachment and steps to load meta data files.
How to verify and modify meta data that has been loaded from an SD card.
Instructions for formatting P2 cards and SD memory cards used with the unit.
How to view the status, remaining capacity, and usage of inserted P2 and SD cards.
Instructions for connecting external storage devices using the USB HOST port.
Table detailing available functions based on different types of connected storage devices.
Steps for physically connecting and initializing external storage devices.
How to transfer data from P2 cards to external storage devices.
Steps for copying clips and viewing storage device information.
How to navigate and manage data within the EXPLORE screen interface.
Procedure for deleting partitions and viewing clips from storage devices.
How to view clip information and delete clips from storage devices.
How to check clips and import/copy data between devices.
Instructions for operating the unit in USB Device Mode for P2 card access via PC.
Operations for viewing and managing 3D clips and thumbnails in REC/PB mode.
How to view/edit clip info, thumbnails, and attach meta data in 3D mode.
Instructions for formatting P2 cards and checking card status in 3D REC/PB mode.
Explanation of how synchronized playback works and the conditions required.
How to view and manage clips in SYNC PB mode, noting restrictions.
How to play back clips and check card status on the master unit in SYNC PB mode.
Explanation of OSD indicators, time codes, compression formats, and clip numbers.
Explanation of icons displayed in the Deck Information (DIAG) screen and their meanings.
How to use the waveform and vectorscope display for video monitoring.
Explanation of time code, user bits, CTL, and internal setting procedures.
How to set time code and user bits using external signals.
How to display and reproduce recorded time code and user bits during playback.
Configuration settings related to thumbnail display and management.
Settings related to clip operations, card formatting, and deletion.
Settings related to displaying clip and card information and properties.
Settings for managing and attaching meta data to clips.
Settings for managing external storage devices and their connection.
Basic operational settings for the unit, including power-on behavior and indicators.
Basic operational settings for the unit, including power-on behavior and recording modes.
Allows assigning specific functions to the USER buttons for customizable access.
Settings related to time code, user bits, and CTL functions.
Settings related to video input signals, internal generators, and output formats.
Settings related to on-screen display (OSD) output, grade, and cross hatch patterns.
Settings for adjusting the LCD monitor's timeout, backlight, color, brightness, and contrast.
Allows assigning specific functions to the USER buttons for customizable access.
System settings related to frequency, mode selection, and device configuration.
Settings for managing menu settings via SD memory cards, including loading, saving, and formatting.
Resets all menu settings to their factory default values.
Displays system information such as firmware version, model, and hour meter.
A table detailing compatible input and output signal formats for various recording and system frequencies.
Explanation of keyboard layouts and their functions for meta data input.
Steps to connect and configure a USB keyboard for use with the unit.
Guidelines for maintaining the unit, handling condensation, and proper storage.
Details on specific error codes, messages, and their corresponding countermeasures.
Comprehensive list of operational warnings, their causes, and deck operation actions.
Specific warnings and errors encountered in 3D REC/PB and SYNC PB modes.
Instructions for updating the unit's firmware to the latest version.
Essential guidelines for recording and managing data on P2 cards.
Information on supported SD and SDHC memory cards and their specifications.
An alphabetical listing of topics and their corresponding page numbers for quick reference.
Crucial safety guidelines and warnings for initial setup and operation.
Regulatory information and compliance statements for USA and Canada.
Specific procedures for handling used batteries in Brazil.
Important safety instructions for the proper and safe use of the unit.
Crucial safety guidelines and warnings for initial setup specific to AG-HPD24E.
Safety instructions concerning the AC power cord for both charger and adaptor.
Details on applicable EMC standards and the required operating environment.
Conditions for achieving compliance with EMC standards, including equipment and cables.
Information on compatible batteries, their characteristics, and removal procedure.
Definitions of essential terms and explanation of page referencing.
Precautions related to handling, environment, and protecting the unit from damage.
Precautions for using the AC adaptor and battery, including characteristics.
Information on compatible storage media and necessary pre-operation setup.
Lists and descriptions of all included and optional accessories.
Detailed explanation of physical controls, slots, ports, and indicators on the unit.
Step-by-step guide for charging the unit's battery pack.
Instructions for installing and removing the unit's battery.
Instructions for connecting and disconnecting the AC power adaptor.
Procedures for powering the unit on and off, including status indicators.
Instructions for setting the unit's internal clock and managing auto power-off.
Information about P2 card usage, insertion, status indicators, and removal.
Details on recording time capacities for P2 cards and clip division.
Procedures for copying clips, preventing deletion, and repairing/reconnecting clips.
Guide to navigating and using the unit's menu system for settings and operations.
Instructions for adjusting the LCD monitor's timeout, backlight, color, brightness, and contrast.
Steps to access and view the thumbnail screen for managing clips.
Procedures for recording video and audio clips onto P2 cards.
Instructions for playing back recorded clips from P2 cards.
Explanation of time code, user bits, and CTL functions and how to set them.
How to use USB Device Mode for PC connection and USB Host for external storage.
Operations for viewing and managing 3D clips and thumbnails in REC/PB mode.
Diagrams and details for connecting units for 3D recording.
Steps to select and enable the 3D recording and playback mode.
Procedures for powering the unit on and off when in 3D REC/PB mode.
Specific instructions for initiating and managing 3D recording.
Procedures for playing back 3D clips in different modes and from various screens.
How to view and interpret 3D thumbnails and their associated information.
Connection diagrams and steps to select the synchronous playback mode.
Guidelines for ensuring proper synchronization when playing back clips across multiple units.
How to play back clips when the thumbnail screen is not displayed.
How to play back clips directly from the thumbnail screen interface.
A detailed breakdown of menu options, settings, and their functions.
General specifications including voltage, power consumption, dimensions, and mass.
Technical details related to digital video recording formats, sampling, and compression.
Technical specifications for digital audio and other interface types.
Technical specifications for the AC adaptor and battery charger.
An alphabetical listing of topics and their corresponding page numbers for quick reference.
Environmental information on proper collection and disposal of electronic waste and batteries.
Introduction to the advanced operations covered in Volume 2 of the manual.
Definitions of essential terms and explanation of page referencing.
Overview of the different operating modes of the unit and their functions.
The main screen interface for recording and playback operations.
Detailed steps for recording audio and video clips onto P2 cards.
Explains different recording methods like hot swap, loop, VFR, and auto recording.
Instructions for playing back recorded clips from the unit.
Diagram illustrating speed adjustments and transitions during playback.
The interface for browsing, managing, and playing back recorded clips via thumbnails.
How to customize the thumbnail screen display for better efficiency and viewing.
How to choose which clip properties are shown in a simplified display.
Detailed steps for playing back selected clips from the thumbnail screen.
How to select and deselect clips for processing on the thumbnail screen.
Procedures for copying clips to P2 cards or external storage devices.
Steps to restore damaged clips and rejoin clip segments.
How to view and edit detailed information and meta data associated with clips.
How to change thumbnails and attach meta data during recording.
Configuring meta data attachment and steps to load meta data files.
How to verify and modify meta data that has been loaded from an SD card.
Instructions for formatting P2 cards and SD memory cards used with the unit.
How to view the status, remaining capacity, and usage of inserted P2 and SD cards.
Instructions for connecting external storage devices using the USB HOST port.
Table detailing available functions based on different types of connected storage devices.
Steps for physically connecting and initializing external storage devices.
How to transfer data from P2 cards to external storage devices.
Steps for copying clips and viewing storage device information.
How to navigate and manage data within the EXPLORE screen interface.
Procedure for deleting partitions and viewing clips from storage devices.
How to view clip information and delete clips from storage devices.
How to check clips and import/copy data between devices.
Instructions for operating the unit in USB Device Mode for P2 card access via PC.
Operations for viewing and managing 3D clips and thumbnails in REC/PB mode.
How to view/edit clip info, thumbnails, and attach meta data in 3D mode.
Instructions for formatting P2 cards and checking card status in 3D REC/PB mode.
Explanation of how synchronized playback works and the conditions required.
How to view and manage clips in SYNC PB mode, noting restrictions.
How to play back clips and check card status on the master unit in SYNC PB mode.
Explanation of OSD indicators, time codes, compression formats, and clip numbers.
Explanation of icons displayed in the Deck Information (DIAG) screen and their meanings.
How to use the waveform and vectorscope display for video monitoring.
Explanation of time code, user bits, CTL, and internal setting procedures.
How to set time code and user bits using external signals.
How to display and reproduce recorded time code and user bits during playback.
Configuration settings related to thumbnail display and management.
Settings related to clip operations, card formatting, and deletion.
Settings related to displaying clip and card information and properties.
Settings for managing and attaching meta data to clips.
Settings for managing external storage devices and their connection.
Basic operational settings for the unit, including power-on behavior and indicators.
Basic operational settings for the unit, including power-on behavior and recording modes.
Allows assigning specific functions to the USER buttons for customizable access.
Settings related to time code, user bits, and CTL functions.
Settings related to video input signals, internal generators, and output formats.
Settings related to on-screen display (OSD) output, grade, and cross hatch patterns.
Settings for adjusting the LCD monitor's timeout, backlight, color, brightness, and contrast.
Allows assigning specific functions to the USER buttons for customizable access.
System settings related to frequency, mode selection, and device configuration.
Settings for managing menu settings via SD memory cards, including loading, saving, and formatting.
Resets all menu settings to their factory default values.
Displays system information such as firmware version, model, and hour meter.
A table detailing compatible input and output signal formats for various recording and system frequencies.
Explanation of keyboard layouts and their functions for meta data input.
Steps to connect and configure a USB keyboard for use with the unit.
Guidelines for maintaining the unit, handling condensation, and proper storage.
Details on specific error codes, messages, and their corresponding countermeasures.
Comprehensive list of operational warnings, their causes, and deck operation actions.
Specific warnings and errors encountered in 3D REC/PB and SYNC PB modes.
Instructions for updating the unit's firmware to the latest version.
Essential guidelines for recording and managing data on P2 cards.
Information on supported SD and SDHC memory cards and their specifications.
An alphabetical listing of topics and their corresponding page numbers for quick reference.
General| Brand | Panasonic |
|---|---|
| Model | AG-HPD24E |
| Category | Voice Recorder |
| Language | English |
