Menu – Handling setting data
140
Loading the setup file
Loading setup files from the memory card
Loads the setup file saved on the memory card.
1
Select the [OTHERS] menu ¨ [FILE] ¨ [SETUP FILE(SD CARD)] ¨ [LOAD].
The list of setup files stored in the specified folder of the memory card is displayed.
• You can also either press the USER button assigned to [LOAD SETUP FILE] or touch the USER button icon to display
the list of setup files.
2
Select the file name for the file to load.
3
Select [SET].
Loading of the file is started. The unit is restarted after loading.
• An error message may be displayed. (ÎCases indicated by error messages: 292)
• The file saved by a camera with different firmware version may not be able to load.
Loading setup files from the main unit memory
Loads the setup file saved on the main unit memory.
1
Select the [OTHERS] menu ¨ [FILE] ¨ [SETUP FILE(MEMORY)] ¨ [LOAD].
2
Select [SET].
Loading of the file is started. The unit is restarted after loading.
To Next Page
Loading...
