Panasonic AG-X2 - Attaching the Eye Cup; Attaching the External Microphone

Preparations before recording – Attaching accessories
38
Attaching the eye cup
1
Align the mounting mark on the eye cup with the mounting mark on the eye cup
mount.
2
Attach the eye cup so that the ridge inside it is aligned with the groove on the eye cup
mount.
Push the eye cup in until it reaches the mounting mark.
(A) Ridge
(B) Groove
(C) Mounting mark
Attaching the external microphone
1
Open the microphone holder.
Open buckle (1), and detach fitting (2) from hook (3).
2
Attach the microphone holder to the microphone holder mounting section.
• Attach using a commercially-available screwdriver.
• There will be some rubbing noises with the rubber when screwing in the microphone holder mounting screws, but please
ensure they are done up tightly.
(A) Microphone holder
(B) Microphone holder mounting screws
(B)
(A)
(C)
(1)
(2) (3)
(A)
(B)