Panasonic AG-X2 - Zebra Patterns Display

Convenient shooting functions – Zebra patterns display
205
Zebra patterns display
The unit can display 2 types of zebra patterns to the output image from the LCD monitor.
1
Select the [VIDEO OUT/LCD/VF] menu ¨ [EI ASSIST] ¨ [ZEBRA] ¨ [ON].
• You can also either press the USER button assigned to [ZEBRA] or touch the USER button icon to display the zebra
pattern and switch display/hide.
This changes depending on the [VIDEO OUT/LCD/VF] menu ¨ [EI ASSIST] ¨ [ZEBRA] settings.
 Setting the detection level
1
Set each item in the [VIDEO OUT/LCD/VF] menu ¨ [EI ASSIST].
[ZEBRA1 DETECT]:
Sets the detection level of zebra pattern 1.
[50%]…[105%]
[ZEBRA2 DETECT]:
Sets the detection level of zebra pattern 2.
[50%]…[105%]
[ZEBRA2]:
Switches enable/disable of zebra pattern 2.
[ON], [OFF]
 Display area of the zebra pattern
The display area of the zebra pattern varies depending on the [VIDEO OUT/LCD/VF] menu ¨ [EI ASSIST] setting.
(A) [ZEBRA2]
(B) [ZEBRA2 DETECT]
(C) [ZEBRA1 DETECT]
(1) [ON]
(2) [OFF]
[ZEBRA] settings Operation when the USER button is pressed
[MOMENT] Displays the zebra pattern for approximately 5 seconds.
[ON], [OFF] Switches display/hide of the zebra pattern.
• The zebra pattern cannot be recorded.
• To record video with less overexposure, manually adjust the shutter speed and brightness (iris/gain) so that the zebra
pattern is no longer displayed. (ÎIris: 151, Gain: 152, Setting the shutter speed: 159)
• (For the )
The zebra pattern is not displayed when the [SCENE FILE] menu ¨ [GAMMA MODE SEL] ¨ [HLG]/[V-Log] is set.
[105%]
[0%]
(A)
(B)
(C)
(1) (2)