Panasonic AG-X2 - Monitoring the Audio

Audio input – Monitoring the audio
187
Monitoring the audio
Audio recorded with the unit can be heard with a speaker or headphones.
Audio is not output from the speaker during shooting.
 Setting the output audio
Sets the audio channel and the format to be output from the headphone terminal.
1
Select the [AUDIO] menu ¨ [OUTPUT SETTINGS] ¨ [AUDIO OUT].
2
Select the type of audio.
[CH1]:
Outputs the signal for audio channel 1 as monaural.
[CH2]:
Outputs the signal for audio channel 2 as monaural.
[CH1/2 STEREO]:
Outputs the signals of the audio channel 1 and the audio channel 2 as stereo.
[CH1/2 MIX]:
Mixes the signals of the audio channel 1 and the audio channel 2 and outputs as monaural.
• If [AUDIO OUT] is assigned to the USER button, pressing the USER button switches the audio channel to output and
format.
Toggles [CH1], [CH2], [CH1/2 STEREO], and [CH1/2 MIX] in order each time the USER button is pressed or the USER
button icon is touched.
• Adjust the volume of the headphones and built-in speaker as follows.
– During recording, volume is adjusted with the [ AUDIO MON] of the multi manual function. (ÎAdjusting headphone
volume: 222)
– During playback, volume is adjusted with the zoom lever. (ÎAdjusting the volume during playback: 231)