Panasonic AG-X2 - Turning the Unit On;Off

Preparations before recording – Turning the unit on/off
41
Turning the unit on/off
1
Set the power switch to <ON> while pressing the lock release button (A) to turn on
the unit.
The status indicator (B) lights on.
 To turn off the unit
Set the power switch to <OFF> while pressing the lock release button. The status indicator goes off.
• The [TIME ZONE] screen is displayed when the power is turned on for the first time. (Î[TIME ZONE]: 25)
Set the time zone, date, and time.
• The built-in battery (rechargeable battery) will discharge. The setting for date/time may be initialized when the unit is not
turned on for approximately 4 months.
Set the date/time again after charging the built-in battery. (ÎSetting the date/time of the internal clock: 43)
• To turn on the power again after [ECO MODE] functions, first switch the power switch to <OFF>, then switch it back to
<ON>.
ON
OFF
(A)
(B)