Panasonic AG-X2 - What You Can Do with this Unit; Recording to the Memory Card; Linking to External Devices

Overview – What you can do with this unit
26
What you can do with this unit
≥Recording to the memory card: 26
≥Linking to external devices: 26
≥Connecting to the network: 27
≥USB tethering connection [X2]: 28
Recording to the memory card
Recording in following types is possible.
• MOV recording (UHD and FHD recording)
• MP4 recording (UHD and FHD recording)
• AVCHD recording
• Variable frame rate recording/Super slow recording
• Simultaneous recording
• Relay recording
• Interval recording
• Background recording
• Pre-recording
• (For the )
Dual codec recording
Linking to external devices
 Connecting to TV/monitor
Connect to a TV/monitor and output images.
• When using , use a BNC cable (<SDI OUT> terminal) to connect a TV/monitor.
(A) HDMI cable
(B) (For the )
BNC cable (<SDI OUT> terminal)
(C) TV/Monitor
• Use a commercially-available Premium High Speed HDMI cable.
• (For the )
Use a commercially-available 5C-FB or equivalent double-shielded cable for the BNC cable.
When using a DVI converter, etc., to connect an HDMI cable to this unit, make sure that you connect last to the
<HDMI> terminal on this unit. Connecting first to the <HDMI> terminal on this unit may cause a malfunction.
(A)
(B)
(C)