Panasonic AG-X2 - Audio Input; Audio Output; Other Input;Output

Specification – Specifications
311
Audio input
Built-in microphone
Stereo microphone
<AUDIO INPUT1>/<AUDIO INPUT2> terminal
XLR (3-pin) ×2
Input high impedance,
<LINE> / <MIC> / <i48V> (Switched with <INPUT 1> / <INPUT 2> switch)
• <LINE>: 4 dBu, 0 dBu (switched with menu)
• <MIC>: −40 dBu, −50 dBu, −60 dBu (switched with menu)
Audio output
<SDI OUT> terminal
LPCM 2ch
<HDMI> terminal
LPCM 2ch
Headphone terminal
3.5 mm diameter stereo mini jack × 1
Speaker
20 mm diameter, round ×1
Other input/output
<TC IN/OUT> terminal
•
BNC terminal ×1
Used as the input and output terminals (switched with menu)
• Input: 1.0 V to 4.0 V [p-p], 10 kΩ
• Output: 2.0 V±0.5 V [p-p], low impedance
<REMOTE> terminal
2.5 mm diameter super mini jack × 1
Remote control terminal of serial communication
Analogue remote control used for previous Panasonic models cannot be used.
USB terminal
USB Type-C
®
×1, USB3.1 Gen1, Host/device combined (switched with menu)
Device: USB mass storage functionality (read only)
Host: Supports bus power (5 V, 0.9 A)
USB tethering functionality
USB ethernet adaptor functionality
<LAN> terminal
RJ-45×1: 1000BASE-T / 100BASE-TX
<DCIN12V> terminal
DC12 V, EIAJ type 4