EasyManua.ls Logo

Panasonic AG-X2 - Check Videos Recorded

Panasonic AG-X2
323 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Shooting Check videos recorded
145
Check videos recorded
By pressing either the USER button
*1
assigned to [REC CHECK] or touching the USER button icon after recording, you can
automatically play back the last approximately 3 seconds of the clip you have just recorded.
*1 [REC CHECK] is set in the <USER8> button at the time of purchase.
Returns to recording standby after checking.
REC check will not operate in following cases.
When the power is turned ON/OFF
When restarted
When the <THUMBNAIL> button is pressed
When the memory card is inserted/ejected
When formatted the memory card
When the USER button assigned to [SLOT SEL] has been pressed, or when the USER button icon assigned to [SLOT
SEL] has been touched to switch the card slot to be recorded to
When switched to [CARD READER MODE] or [SERVICE MODE]
When the [RECORDING] menu ¨ [2 SLOTS FUNC.] is set to [SIMUL REC]/[BACKGR REC]/[DUAL CODEC REC]
*2
When either of the following settings are changed
[SYSTEM] menu ¨ [FREQUENCY]
[SYSTEM] menu ¨ [FILE FORMAT]
[SYSTEM] menu ¨ [REC FORMAT]
[RECORDING] menu ¨ [2 SLOTS FUNC.]
[RECORDING] menu ¨ [REC FUNCTION] ¨ [REC MODE]
For USER button settings (ÎAssigning functions to the USER buttons: 65)
*2 Available for use when using .

Table of Contents

Related product manuals