Panasonic AG-X2 - Page 201

Special recording function – Dual codec recording [X2]
201
 Note regarding [REC FORMAT] and [DUAL CODEC SETTING] which can be set with
dual codec recording
• When [DUAL CODEC SETTING] is set to [FHD 50Mbps]
• When [DUAL CODEC SETTING] is set to [FHD 8Mbps]
[FREQUENCY] [REC FORMAT] Bit rate of sub recording
[59.94Hz] [2160-29.97p/420LongGOP 100M], [2160-23.98p/420LongGOP 100M]
50 Mbps
[50.00Hz] [2160-25.00p/420LongGOP 100M]
[FREQUENCY] [REC FORMAT] Bit rate of sub recording
[59.94Hz]
[2160-29.97p/420LongGOP 100M], [2160-23.98p/420LongGOP 100M],
[1080-59.94p/422ALL-I 200M], [1080-59.94p/422LongGOP 100M],
[1080-59.94i/422ALL-I 100M], [1080-29.97p/422ALL-I 100M],
[1080-23.98p/422ALL-I 100M]
8 Mbps
[50.00Hz]
[2160-25.00p/420LongGOP 100M], [1080-50.00p/422ALL-I 200M],
[1080-50.00p/422LongGOP 100M], [1080-50.00i/422ALL-I 100M],
[1080-25.00p/422ALL-I 100M]
• To set [DUAL CODEC SETTING], make the following menu settings beforehand:
– [SCENE FILE] menu ¨ [VFR] ¨ [OFF]
– [RECORDING] menu ¨ [REC FUNCTION] ¨ [REC MODE] ¨ [NORMAL]
– [NETWORK] menu ¨ [NETWORK FUNC] ¨ [OFF]
– [SYSTEM] menu ¨ [FILE FORMAT] ¨ [MOV]
– [SYSTEM] menu ¨ [SUPER SLOW] ¨ [OFF]
• To set [DUAL CODEC SETTING] to [FHD 50Mbps], make the following menu setting beforehand:
– In [SYSTEM] menu ¨ [REC FORMAT], set to the UHD (3840×2160) item