Convenient shooting functions – Face detection/tracking AE&AF function
212
• In the following cases, it cannot be used.
– When set to manual mode
– When set to digital zoom
– When using the area mode function
– When IR recording is enabled
– When the [CAMERA] menu ¨ [SW MODE] ¨ [AF AREA WIDTH] ¨ [ON] is set.
– When the [SCENE FILE] menu ¨ [VFR] ¨ [ON] is set.
– When the [SYSTEM] menu ¨ [SUPER SLOW] ¨ [ON] is set.
• In the [CAMERA] menu ¨ [SW MODE] ¨ [FACE DETECT/TRACKING MODE], you can switch whether to perform only
auto focus or to perform both auto focus and exposure compensation. (Î[FACE DETECT/TRACKING MODE]: 84)
• When the following is set in the menus and connection to a TV/external monitor is via an HDMI cable, the face detection
frame and tracking frame are not output externally.
– (For the )
[VIDEO OUT/LCD/VF] menu ¨ [VIDEO OUT SEL] ¨ [HDMI OUT FORMAT] ¨ [720×480p]/[720×576p]
– (For the )
[VIDEO OUT/LCD/VF] menu ¨ [HDMI OUT] ¨ [OUT FORMAT] ¨ [720×480p]/[720×576p]
(Tracking AE&AF function)
• The subject cannot be touched in the mirror shooting mode.
To Next Page