Output format – Format that can be output from the HDMI terminal
241
• [HDMI OUT FORMAT]/[OUT FORMAT] restores the factory settings when the settings of [FREQUENCY] and [REC
FORMAT] change and the current setting values of [HDMI OUT FORMAT]/[OUT FORMAT] cannot be acquired.
• The output format when playing back from the thumbnail screen is as follows.
– It will be the value set in [HDMI OUT FORMAT]/[OUT FORMAT] when the recording resolution of the playback clip is the
same as [REC FORMAT].
– It will be factory setting of [HDMI OUT FORMAT]/[OUT FORMAT] when the recording resolution of the playback clip is
different from [REC FORMAT].
• When either [720×480p] or [720×576p] is selected, images are output compressed horizontally so that they fit within the
screen.
• There may be a fews seconds of images not displayed on the external device when the clips are changing over, etc.
To Next Page
Loading...
