Panasonic AG-X2 - Page 317

Firmware Ver. 1.1 – Recording Formats Supporting Dual Codec Recording Added [X2]
F-4
Recording Formats Supporting Dual Codec Recording Added [X2]
Recording formats that support dual codec recording have been added.
 Note regarding [REC FORMAT] and [DUAL CODEC SETTING] which can be set with
dual codec recording
• When [DUAL CODEC SETTING] is set to [FHD 8Mbps]
[FILE FORMAT] [FREQUENCY] [REC FORMAT] Bit rate of sub recording
[MOV]
[59.94Hz] [1080-59.94i/422LongGOP 50M]
8 Mbps
[50.00Hz] [1080-50.00i/422LongGOP 50M]
[MP4]
[59.94Hz]
[2160-29.97p/420LongGOP 72M]
[2160-23.98p/420LongGOP 72M]
[1080-59.94p/420LongGOP 50M]
[1080-59.94i/420LongGOP 50M]
[1080-23.98p/420LongGOP 50M]
[50.00Hz]
[2160-25.00p/420LongGOP 72M]
[1080-50.00p/420LongGOP 50M]
[1080-50.00i/420LongGOP 50M]
• The settings for clips recorded on the sub recording side will be as follows:
– Recording will be performed in the same file format as the main recording side.
– Recording is at FHD (1920×1080)
– The recorded frame rate will be the same as the recording format on the main recording side.