Panasonic AJ-PX380G - [IN;OUT TERMINAL ASSIGN] screen

– 171 –
Chapter 8 Display — Screen status display
Item Description
[CAC MODE] Displays the operation mode of CAC.
f [AUTO]: The CAC le is automatically selected.
[CONNECT LENS TYPE] Displays the lens ID of the currently connected digital lens.
[SELECT FILE TITLE] Displays the title and the le version of the CAC le currently used in the operation. The CAC le can be set in the main menu
→ [MAINTENANCE] → [CAC ADJ.].
[CAC WARNING] Displays a warning when operation of CAC has stopped.
f [CAC LENS DATA INVALID]: This is displayed, for example, when the response data from the lens is not supported.
f [LENS INIT. NOT COMPLETED]: This is displayed, for example, when initialization of the lens cannot complete.
f [CAC FILE DATA NOT FOUND]: Displayed when the chromatic aberration compensation function is set to [ON] and the
chromatic aberration compensation data matching the connected lens.
[IN/OUT TERMINAL ASSIGN] screen
Display the settings of input and output terminals.
Item Description
[GL IN/VIDEO OUT]
Displays the setting status of the <GL IN/VIDEO OUT> terminal set in the main menu → [IN/OUT SEL] → [GL IN/VIDEO OUT
SEL].
[GL IN]: The terminal is set as [GENLOCK IN].
[VIDEO OUT]: The terminal is set as [VIDEO OUT].
[TC IN/OUT]
Displays the setting status of the <TC IN/OUT> terminal set in the main menu → [IN/OUT SEL] → [TC IN/OUT SEL].
[TC IN]: The terminal is set as [TC IN].
[TC OUT]: The terminal is set as [TC OUT].
[SDI OUT2/IN]
Displays the setting status of the <SDI OUT2/IN> terminal set in the main menu → [IN/OUT SEL] → [SDI OUT2/IN SEL].
[SDI OUT2]: The terminal is set as [SDI OUT2].
[SDI IN]: The terminal is set as [SDI IN].