Panasonic AJ-PX800G - [User Sw]; [Sw Mode]

– 127 –
Chapter 6 Menu Operations — Menu list
Item Description of settings
[SHOOTING MODE] Sets the shooting mode according to the shooting environment.
[NORMAL]: Selects the shooting mode for an environment at normal brightness.
[HIGH SENS.]: Selects high-sensitivity. (Appropriate when shooting in a dark environment.) The viewnder
shows [H.SENS.].
f Factory setting: [NORMAL]
[USER SW]
Set the function to be assigned to the USER button and the <RET> button of the lens.
Item Description of settings
[USER MAIN] Sets the function to be assigned to the <USER MAIN> button.
[INHIBIT], [LEVEL GAUGE], [LEVEL GAUGE RESET], [WFM], [D.ZOOM x2], [D.ZOOM x4], [DRS],
[FBC], [S.GAIN], [ATW], [ATW LOCK], [SPOTLIGHT], [BACKLIGHT], [Y GET], [PUSH AF], [PRE
REC], [TEXT MEMO], [SHOT MARK], [SLOT SEL], [AUDIO MON SEL], [REC CHECK], [USB MODE],
[PLAYLIST], [EVF COLOR], [REC DURING UPLOAD], [UPLOAD LIST], [STREAMING START]
f Factory setting: [Y GET]
[USER1] Sets the function to be assigned to the <USER1> button.
[INHIBIT], [LEVEL GAUGE], [LEVEL GAUGE RESET], [WFM], [D.ZOOM x2], [D.ZOOM x4], [DRS],
[FBC], [S.GAIN], [ATW], [ATW LOCK], [SPOTLIGHT], [BACKLIGHT], [Y GET], [PUSH AF], [PRE
REC], [TEXT MEMO], [SHOT MARK], [SLOT SEL], [AUDIO MON SEL], [REC CHECK], [USB MODE],
[PLAYLIST], [EVF COLOR], [REC DURING UPLOAD], [UPLOAD LIST], [STREAMING START]
f Factory setting: [TEXT MEMO]
[USER2] Sets the function to be assigned to the <USER2> button.
[INHIBIT], [LEVEL GAUGE], [LEVEL GAUGE RESET], [WFM], [D.ZOOM x2], [D.ZOOM x4], [DRS],
[FBC], [S.GAIN], [ATW], [ATW LOCK], [SPOTLIGHT], [BACKLIGHT], [Y GET], [PUSH AF], [PRE
REC], [TEXT MEMO], [SHOT MARK], [SLOT SEL], [AUDIO MON SEL], [REC CHECK], [USB MODE],
[PLAYLIST], [EVF COLOR], [REC DURING UPLOAD], [UPLOAD LIST], [STREAMING START]
f Factory setting: [LEVEL GAUGE]
[RET SW] Sets the function to be assigned to the <RET> button of lens.
[INHIBIT], [PUSH AF], [D.ZOOM x2], [D.ZOOM x4], [REC CHECK], [TEXT MEMO], [SHOT MARK],
[EVF COLOR], [REC DURING UPLOAD], [UPLOAD LIST], [STREAMING START]
f Factory setting: [REC CHECK]
[SW MODE]
Congure the settings of each mode when switched using each switch.
These menu items cannot be set when the thumbnail screen is displayed.
Item Description of settings
[LOW GAIN]
Sets the gain value to be assigned to the <L> position of the <GAIN> switch. (3 dB steps) ([−6dB] is only
for [HIGH SENS.])
[−6dB]…[30dB]
f Factory setting: [0dB]
[MID GAIN]
Sets the gain value to be assigned to the <M> position of the <GAIN> switch. (3 dB steps) ([−6dB] is only
for [HIGH SENS.])
[−6dB]…[30dB]
f Factory setting: [6dB]
[HIGH GAIN]
Sets the gain value to be assigned to the <H> position of the <GAIN> switch. (3 dB steps) ([−6dB] is only
for [HIGH SENS.])
[−6dB]…[30dB]
f Factory setting: [12dB]
[SUPER GAIN] Sets the super gain to be assigned to the USER button.
[30dB], [36dB], [42dB]
[ALL]: Each time the USER button is pressed, the setting toggles [30dB] → [36dB] → [42dB] → (off) in
order.
f Factory setting: [30dB]
[ATW] Assigns the auto tracking white balance function to the <WHITE BAL> switch.
[Bch], [OFF]
f Factory setting: [OFF]
[ATW SPEED] Sets the control speed of the auto tracking white balance function.
[FAST], [NORMAL], [SLOW]
f Factory setting: [NORMAL]
[ATW TARGET R] Finely adjusts the Rch output for convergence with auto tracking white balance operation.
[−10]…[10]
f Factory setting: [0]
[ATW TARGET B] Finely adjusts the Bch output for convergence with auto tracking white balance operation.
[−10]…[10]
f Factory setting: [0]
[W.BAL PRESET] Sets the color temperature to be assigned to the <PRST> position of the <WHITE BAL> switch.
[3200K], [5600K], [VAR]
f Factory setting: [3200K]