Panasonic AJ-PX800G - List of Recording Settings and Recording Functions; Selecting Video Output

– 74 –
Chapter 4 Shooting — Multi formats
System mode Recording function
[LINE&FREQ] [REC FORMAT] [CAMERA MODE] [AUDIO SMPL RES]
Simultaneous
recording
Dual codec recording
HD proxy*
1
SD proxy*
2
*
3
[720-59.94P]
[AVC-I100/60P] —
[24BIT]/[16BIT]
l l l
[AVC-I100/30PN] —
l l
—
[AVC-I100/24PN] —
l l
—
[AVC-I50/60P] —
l
—
l
[AVC-G50/60P] —
[24BIT]
l l l
[AVC-G25/60P] —
l l l
[AVC-G12/60P] —
[16BIT]
l
— —
[DVCPRO HD/60P] —
l
— —
[720-50P]
[AVC-I100/50P] —
[24BIT]/[16BIT]
l l l
[AVC-I100/25PN] —
l l
—
[AVC-I50/50P] —
l
—
l
[AVC-G50/50P] —
[24BIT]
l l l
[AVC-G25/50P] —
l l l
[AVC-G12/50P] —
[16BIT]
l
— —
[DVCPRO HD/50P] —
l
— —
[480-59.94i]
[DVCPRO50/60i]
[60i]
[16BIT]
l
—
l
[30P]
l
— —
[DVCPRO/60i]
[60i]
l
—
l
[30P]
l
— —
[DV/60i]
[60i]
l
—
l
[30P]
l
— —
[576-50i]
[DVCPRO50/50i]
[50i]
[16BIT]
l
—
l
[25P]
l
— —
[DVCPRO/50i]
[50i]
l
—
l
[25P]
l
— —
[DV/50i]
[50i]
l
—
l
[25P]
l
— —
*1 [AVC-G6 2CH MOV]
*2 When [LINE&FREQ] is set to [720-60P] or [720-50P], [LOW 2CH MOV] cannot be selected.
*3 When [LINE&FREQ] is set to [480-59.94i] or [576-50i], proxy recording mode is xed to [LOW 2CH MOV]. The selection menu of the proxy recording mode
(the menu → [RECORDING SETUP] → [DUAL CODEC SETTING] → [PROXY REC MODE]) is not displayed.
List of recording settings and recording functions
The recording modes of the camera act as follows depending on the setting of [RECORDING] in the main menu → [RECORDING SETUP]. Even in
“Available” cases, recording functions are restricted in some system modes. For details, refer to the table in “System modes and recording functions”.
Setting Recording setting (setting menu) Recording/operation enabled/disabled
Operation mode [RECORDING] Pre-recording One-clip recording
Simultaneous
recording
Interval recording [INTERVAL] Not available Not available Not available
One-shot recording [ONE SHOT] Not available Not available Not available
Loop recording [LOOP] Not available Not available Not available
Standard recording [NORMAL] Refer to “System modes and recording functions”.
Setting Recording setting (setting menu) Recording/operation enabled/disabled
Operation mode [RECORDING] Dual codec recording Text memo Shot mark
Interval recording [INTERVAL] Not available Not available Not available
One-shot recording [ONE SHOT] Not available Not available Not available
Loop recording [LOOP] Not available Not available Not available
Standard recording [NORMAL] Refer to “System modes and recording functions”.
Selecting video output
The video output method can be selected.
Video output can be selected, for example, in the setting menus and SmartUI.
Setting item Description of settings
[MON]
([SET02:MON/HDMI FORMAT] screen of SmartUI)
Select the signal type used to output to the <MON OUT> and <HDMI> terminals.