Panasonic AJ-PX800G - How to Use Scene File Data

– 85 –
Chapter 4 Shooting — Handling setting data
Loading written user data
1
Select [LOAD] in the main menu → [OTHER FUNCTIONS] → [USER FILE].
The conrmation screen is displayed.
If [SYSTEM RESTART] is displayed on the conrmation screen, the camera will restart after reading out is complete.
2
Select [YES] and press the <SET> button (or the jog dial button).
Loading of the le begins.
How to use scene le data
The content of setting data can be written to and read written data from scene le area on the internal memory of the camera. Six types of scene les
can be registered. Use of this data allows you to quickly reproduce optimum setup states.
r Factory settings
[F1:]: File that is suitable for standard shooting.
[F2:FLUO.]: The le suitable for shooting when the characteristics of uorescent light should be considered (such as shooting indoors).
[F3:SPARK]: The le that sharpens the color hue and contrast and that has suitable resolution for SD shooting.
[F4:B-STR]: The le suitable for shooting when the tone level of darker areas are to be stretched (such as shooting at sunset).
[F5:CINE V]: The le suitable for shooting cinematic video that has shaper contrast.
[F6:CINE D]: The le suitable for shooting cinematic video that has wider dynamic range.
@@
NOTE
t [SYSTEM MODE] does not change even if the scene le is changed. Set all items in the main menu → [SYSTEM MODE].
Saving scene le setting data to the camera memory
Fig. 1
1
Select a scene file to save in [FILE] in the [CAM02:SCENE FILE] screen of SmartUI.
2
Select [SAVE] in the main menu → [SCENE FILE] → [LOAD/SAVE/INITIALIZE]. (Fig. 1)
A conrmation screen is displayed.
3
Select [YES] and press the <SET> button (or the jog dial button).
The selected scene le is saved to the camera.
Loading the scene le saved in the camera
1
Select a scene file to load in [FILE] in the [CAM02:SCENE FILE] screen of SmartUI.
2
Select [LOAD] in the main menu → [SCENE FILE] → [LOAD/SAVE/INITIALIZE].
The conrmation screen is displayed.
3
Select [YES] and press the <SET> button (or the jog dial button).
The selected scene le is loaded from the camera.
Restoring the scene le setting data to the factory settings
1
Select the scene file to restore to the factory settings in [FILE] in the [CAM02:SCENE FILE] screen of SmartUI and press the
<SET> button (or the jog dial button).
2
Select [INITIALIZE] in the main menu → [SCENE FILE] → [LOAD/SAVE/INITIALIZE].
The conrmation screen is displayed.