Panasonic AJ-PX800G - Smartui Basic Operations; Buttons Used with Smartui; Initializing Smartui Menu Items

– 145 –
Chapter 7 SmartUI operation — SmartUI basic operations
SmartUI basic operations
Buttons used with SmartUI
HOLD COUNTER RESET MONITOR SEL
/REW STOP FF/ PLAY/PAUSE
CAM
AUDIO
SETUP
HOME
LIGHT
0
-10
-18
-20
-30
dB
TCG NDF SLAVE P -REC
1 2
MEDIA
E
F
BATT
E
F
CH1
CH2
A
SET
THUMBNAIL
KEY LOCK
TOP SHIFT
1
2
3
4
5
7
6
When the camera is turned on, the [HOME] screen is displayed. The status of the [HOME] screen at previous start-up is retained.
1 <LIGHT> button
Switches the SmartUI backlight on and off. This can be operated regardless of the status of the <KEY LOCK> switch.
2 <CAM> button
Displays a settings screen related to the camera image ([CAMERA] screen).
Each time you press the button, the settings screens change in order.
3 <AUDIO> button
Displays a settings screen related to audio ([AUDIO] screen).
Each time you press the button, the settings screens change in order.
4 <SETUP> button
Displays a settings screen related to time code and image output ([SETUP] screen).
Each time you press the button, the settings screens change in order.
5 <HOME> button
f While another screen is displayed, press this button to return to the [HOME] screen.
f While the [HOME] screen is displayed, press this button to change the status information display at the bottom of the screen.
6 <KEY LOCK> switch
Slide to the right to lock the operations of all buttons of SmartUI. Slide to the left to unlock.
* Buttons for thumbnail operations will be locked as well.
7 <HOLD> button, <COUNTER> button, <RESET> button, <MONITOR SEL> button, <%/REW> button, <STOP> button, <FF/)> button,
and <PLAY/PAUSE> button
f When the [HOME] screen is displayed
The function printed above or below each button is performed.
f When the [CAMERA] screen, the [AUDIO] screen, or the [SETUP] screen is displayed
Instead of the printed functions, the functions in the [ ] of SmartUI are assigned to upper or lower buttons corresponding to each setting screen. For
details, refer to “SmartUI menu list” (page 148).
Initializing SmartUI menu items
Items congured with SmartUI are saved in the user le.
By selecting [INITIALIZE] in the main menu → [OTHER FUNCTIONS] → [USER FILE], you can restore the user le menu setting to its factory setting.
Use the main menu → [OTHER FUNCTIONS] → [MENU INITIALIZE] to restore all of the user les and six scene les to their factory settings.