Panasonic AJ-PX800G - Warning and Status Display Section

– 24 –
Chapter 2 Description of parts — Warning and status display section
Warning and status display section
2
431
1 Back tally lamp
When the back tally switch is set to <ON>, the lamp acts in the same way as the front tally lamp at the viewnder.
2 Rear tally lamp
When the back tally switch is set to <ON>, the lamp acts in the same way as the back tally lamp.
3 Back tally switch
Controls the operation of the battery tally lamp and rear tally lamp.
<ON>: Enables the back tally lamp and the rear tally lamp.
<OFF>: Disables the back tally lamp and the rear tally lamp.
4 <WARNING> lamp (page 203)
Starts ashing or is illuminated if something unusual occurs in the memory.