Panasonic AJ-PX800G - Using Audio Devices; Preparing for Audio Input

– 37 –
Chapter 3 Preparation — Preparing for audio input
Using audio devices
c
a b
a: <AUDIO IN CH1/3> terminal
b: <AUDIO IN CH2/4> terminal
c: <LINE>/<MIC> switch
1
Connect the audio equipment to the <AUDIO IN CH1/3> or <AUDIO IN CH2/4> terminal of the camera with the XLR cable.
2
According to the channel to which the XLR cable is connected, switch the input signal to [REAR] on the [AUD02:INPUT] screen of
SmartUI.
3
Switch the <LINE>/<MIC> switch on the rear screen to <LINE>.