Panasonic AlCare TK-AS500 - Changing the Settings; Setting alkaline priority mode

How to change
Preparation: Please turn o󰀨 the faucet.
Setting the
Alkaline priority
mode
At the time of purchase, the product is in the puried water selection mode when
water is stopped after use of puried water.
Performing the following operation restores the product to the state where
Alkaline 1, 2 or 3 is selected even after use of puried water.
Note that puried water ows for 10 minutes in the automatic continuation mode.
(P. EN27)
Press approx. 3 seconds.

To cancel the setting
Press the button approx. 3 seconds again.
z When the setting is canceled, puried water remains selected even if water is
stopped after use of puried water. (state at the time of purchase)
Muting the Acidic
buzzer
This setting mutes the buzzer sound that beeps while weak acidic water is used.
Press approx. 3 seconds.

To restore the buzzer sound
Press the button approx. 3 seconds again.
z The buzzer can also be stopped temporarily without setting.(P. EN27)
z The above settings cannot be made during automatic electrode cleaning (P. EN31).
Changing the Settings
Pi
Pi
PiPiPiPi
PiPiPiPi
EN32