EN15
Installation
English
Installation 3
Attach the bypass selector
Keep all parts that are not used during installation, as they may be needed later if the unit is moved or the faucet
is changed.
Outside-screwed faucet
• Water faucet to which the Alkaline Ionizer
can be installed without any accessory.
1
Remove the nut and adaptor.
Nut
Adaptor
(with gasket)
Bypass selector
Gasket
Do not remove the gasket and the lter
inside the bypass selector.
If these are removed, return them to the
original position.
Make sure foreign matter is not attached
to the lter and the gasket is not inclined.
Gasket and Filter
2
Attach the nut and adaptor.
1
2
Nut
Adaptor (with gasket)
3
Attach the bypass selector and
tighten the nut until the bypass
selector does not turn.
z Do not use any tools.
(Doing so may damage the nut.)
z Make sure the bypass selector is
not inclined.
1
2
Bypass selector
Nut
Aerator (not used)
y Do not use the removed aerator.
To Next Page
Loading...
