EN16
Installation 3
Attach the bypass selector
(continued)
Keep all parts that are not used during installation, as they may be needed later if the unit is moved or the faucet
is changed.
Inside-screwed faucet
• Water faucet to which the Alkaline Ionizer
can be installed with an accessory.
Aerator (not used)
y Do not use the removed aerator.
1
Screw in the bushing. Insert it
into the bypass selector.
Bushing (Accessory)
Gasket
Bypass selector
2
Attach the bypass selector and
tighten the nut until the bypass
selector does not turn.
z The bypass selector should be
screwed straight. Screwing it at
an angle may strip the threads,
resulting in water leaks.
z Do not use any tools.
(Doing so may damage the nut.)
When water leak occurs after
attaching the nut and adaptor
Use the gasket attached on the
faucet.
Nut
Bypass
selector
To Next Page
Loading...
