EN6
Safety Precautions
Please make sure to follow these instructions
CAUTION
Installation location
z Do not block the main spout, or bend, twist, atten, pull or clamp the hose.
(Doing so may cause water to leak, interrupt the output of water or cause other problems.)
z Do not connect a hose or any other appliances to main spout.
(Doing so may cause water leaks or malfunctions.)
z Do no use the product with the outlet pipe loosened.
(Doing so may cause water leaks or damage.)
y If it has come loose, screw it in securely.
z Do not connect the Alkaline Ionizer to a main stop system water boiler (equipped
with a structure that does not stop water at the hot water outlet) [such as an
instantaneous water boiler].
(Doing so may cause a malfunction in the water boiler.)
z Install the main unit on a level surface.
(Failure to do so may cause the main unit to topple over, resulting in injury.)
Storing alkaline ion water and puried water
z Use alkaline ion water or puried water immediately after it is produced. When
storing it for future consumption, pour it into a clean sealed container, and
consume it within 1 day if it is kept at room temperature or within 2 days if it is
kept in the refrigerator.
( Since the Alkaline Ionizer removes sterilizers (such as chlorine), the water quality is altered over
time, possibly causing health problems.)
In case of abnormality
z If you feel sick after drinking alkaline ion water, or if the symptom does not
improve after continued use, stop drinking the water and consult a doctor.
(Otherwise health problems may result.)
z If you experience skin problems after applying acidic water to your skin, stop
using it immediately, and consult a doctor.
(Otherwise health problems may result.)
Hot water
z Do not allow water above a temperature of 60 °C to pass through the Alkaline
Ionizer.
( A burn injury may occur due to water coming out from the main spout.)
To Next Page
Loading...
