21
Saving Power
3 Click [OK].
Click [Restore initial settings] to return to the factory default settings, and click [OK].
NOTE
You can also enable the Intel video driver power saving function as follows.
A Click [start] - [Control Panel] and click [Other Control Panel Options] under [See Also] on the left side of the screen
and select [Intel(R) GMA Driver for Mobile].
B Click [Notebook], [Apply] and [OK].
C Click [Display Settings].
D Click [Power Settings].
E Click [Modify Settings].
F Click [Intel(R) Display Power Saving Technology] to add a check mark.
G Move the slide bar to [Maximum Battery] and click [OK].
H Click [OK].
There is no need to reboot the computer.
For how to enable/disable the Wake Up from wired LAN function ( page 72)
For how to enable/disable the Wake Up from wireless LAN function ( page 81)
To Next Page
Loading...
