68
Modem
<only for model with internal modem>
CAUTION
Do not use the PBX internal phone lines installed in company offices. Doing so may lead to a fire or electric shock.
You cannot connect the modem to the following lines.
• Interphone
•Intercoms
•ISDN
Be sure to connect the telephone cable into the modem port, not into the LAN port.
Use a surge protector since the modem may be damaged by a sudden high voltage surge that may occur in the event
of a lightning strike.
1 Open the cover and connect the telephone jack (A) to the com-
puter by using the telephone cable (included) (B).
Hold the cable so that the shape of the connector (C) matches the port, and
insert fully until it clicks.
2 Click [start] - [Control Panel] - [Printers and Other Hardware] -
[Phone and Modem Options] and change the settings as neces-
sary.
NOTE
Do not enter standby or hibernation during communications.
To remove the cable, press and hold the lever and pull out.
Connecting the Internal Modem with a Telephone Jack
To Next Page
Loading...
