Panasonic CZ-256ESMC2

33
6 Using the System
6.4.1.2 Operating all units by tenant
Use this screen to operate all connected indoor units of each tenant.
Procedure
Select 1.Status/Control in the main menu and 1.Each tenant in the sub menu.
1
When you touch a tenant name, a remote control window appears. This window allows you to
perform on/off operations for all units of the tenant.
2
When you touch
, a remote control window appears. This window allows you to
make detailed settings for operations on all units of the tenant.
1.Status/Control
2.Total data/Cut-off
3.Distrib. ratio/Usage
4.Maintenance/Test Run
5.Initial settings
6.Auxiliary settings
1.Each tenant
2.Each tenant details
3.Each zone
4.Each zone details
5.All units
Main
Sub
1
1
1
1
CZ-256ESMC2_EN.indb 33CZ-256ESMC2_EN.indb 33 9/14/2011 3:16:50 PM9/14/2011 3:16:50 PM