Panasonic CZ-256ESMC2

59
6 Using the System
6.8.3.2 Programming weekly timers
You can program weekly timers by assigning any daily timer to each day of the week. Up to 50
types of weekly timers can be programmed.
Procedure
Select 6.Auxiliary settings in the main menu and 3.Program timer in the sub menu.
Select existing daily
timers.
Cancels the setting.
Confirms the setting.
1
2
1.Status/Control
2.Total data/Cut-off
3.Distrib. ratio/Usage
4.Maintenance/Test Run
5.Initial settings
6.Auxiliary settings
1.Zone name
2.ZoneNo./Mng.target
3.Program timer
4.Ten.Ho/TimerSp.Day
5.Prohibit R/C
6.Distribution time zone
7.Special distrib. day
8.I/D unit settings
10.WEB settings
11.User settings
9.Other settings
1
With Weekly timer, select a weekly timer number ( 1 to 50 ).
Up to 50 types of weekly timers can be set. Three items each are displayed.
Each press of

changes the display in order like 1,2,3 , 2,3,4 , 3,4,5 .
Each press of

changes the display in order like 50,1,2 , 49,50,1 , 48,49,50 .
2
Select the daily timer number ( D1 to D50 , Holiday , Sp1 to Sp5 ) to set and confi rm or
cancel each button.
Main
Sub
3
3
6
6
CZ-256ESMC2_EN.indb 59CZ-256ESMC2_EN.indb 59 9/14/2011 3:17:06 PM9/14/2011 3:17:06 PM