Panasonic CZ-256ESMC2 - Setting Zone Numbers and Management Targets; Main Sub

54
6 Using the System
6.8.2 Setting zone numbers and management targets
Use this screen to set the zone number and management category for individual indoor units. Be
sure to assign a central address to each unit.
Procedure
Select 6.Auxiliary settings in the main menu and 2.ZoneNo./Mng.target in the sub menu.
1
2
1.Status/Control
2.Total data/Cut-off
3.Distrib. ratio/Usage
4.Maintenance/Test Run
5.Initial settings
6.Auxiliary settings
1.Zone name
2.ZoneNo./Mng.target
3.Program timer
4.Ten.Ho/TimerSp.Day
5.Prohibit R/C
6.Distribution time zone
7.Special distrib. day
8.I/D unit settings
10.WEB settings
11.User settings
9.Other settings
Main
Sub
2
2
6
6
CZ-256ESMC2_EN.indb 54CZ-256ESMC2_EN.indb 54 9/14/2011 3:17:03 PM9/14/2011 3:17:03 PM