Panasonic CZ-256ESMC2

36
6 Using the System
6.4.3 Displaying general information by zone
Use this screen to display the state of all units in a zone and to operate those units.
Procedure
Select 1.Status/Control in the main menu and 3.Each zone in the sub menu.
1
When you touch a unit name, a remote control window for individual operations appears.
2
When you touch a zone name, a remote control window for operating all units in the zone
appears.
3
When you touch All units , a remote control window for operating all connected units appears.
1.Status/Control
2.Total data/Cut-off
3.Distrib. ratio/Usage
4.Maintenance/Test Run
5.Initial settings
6.Auxiliary settings
1.Each tenant
2.Each tenant details
3.Each zone
4.Each zone details
5.All units
Move the display position on the
screen up and down one line.
Main
Sub
1
1
3
3
The fi rst twelve characters are displayed for zone names and unit names.
CZ-256ESMC2_EN.indb 36CZ-256ESMC2_EN.indb 36 9/14/2011 3:16:52 PM9/14/2011 3:16:52 PM