Panasonic CZ-256ESMC2

49
6 Using the System
6.7 Maintenance and Test Runs
6.7.1 Checking inspection signs
Use this screen to check for indoor units for which fi lter cleaning signs have been issued, and
outdoor units (GHP) for which engine oil inspection signs have been issued.
Procedure
Select 4.Maintenance/Test Run in the main menu and 1.Inspection sign in the sub menu.
If fi lter cleaning signs or engine oil inspection signs have been issued, contact your dealer or
service provider to request cleaning or oil exchange.
1.Status/Control
2.Total data/Cut-off
3.Distrib. ratio/Usage
4.Maintenance/Test Run
5.Initial settings
6.Auxiliary settings
1.Inspection sign
2.Alarm log
3.Test run
Filter cleaning signs are only an approximate guide. We recommend that you clean indoor unit fi lters regularly,
even if no signs have been issued.
Main
Sub
1
1
4
4
CZ-256ESMC2_EN.indb 49CZ-256ESMC2_EN.indb 49 9/14/2011 3:17:00 PM9/14/2011 3:17:00 PM