9
When a screen like the one shown below appears, touch the Check button.
[File form]
A fi le name is fi xed as follows according to the year, month, and date when the distribution data
output was carried out.
20060316A.csv (Example of a fi le output on March 16, 2006)
When outputting repeatedly on the same day, the last “A” varies as B, C, D, and so forth.
(Outputting is possible up to 26 times a day).
Data composition in the fi le is the same as that in a cut-off processing fi le.
[Caution]
Distribution data fi les are stored in the “Data” folder.
Copy output distribution data fi les to your PC and then delete them from the PC card.
When distribution data fi les are too many, normal backups of cut-off data may become impossible.
6.5.5.4 Restoring data
Proceed as follows to restore setting data and total data from optional PC Cards.
Procedure
bk
Insert a PC card and touch the Restore button.
bl
When a window like the one shown below
appears, touch the OK button.
* When trying to restore data backed up using an old-version Intelligent Controller, a message “Unsupported
fi le version. Perform Restore?” will be displayed; confi rm the message and touch “Yes”.
After completing restoring, “Rebooting.” will be displayed and then touch “OK”. The data restored will be
effective after rebooting. (After “Converting data” is displayed for a while, the system will automatically
reboot again.)
* Everyday, at 23:30 to 00:00, cut-off processing take place, when you cannot press the Restore button.
bm
When a window like the one shown below
appears, touch the Check button.
Use the special optional PC Cards to back up and restore Intelligent Controller data. For details about using
PC Cards, refer to the instructions of the PC Cards.
Depending on the amount of data, backup and restore operations may require up to 15 minutes.
To Next Page
Loading...
