Panasonic CZ-256ESMC2

56
6 Using the System
6.8.3 Programming timers
Up to 50 types of daily timers and 50 types of weekly timers can be programmed. It is also possible
to set holidays or timer special days for tenants.
6.8.3.1 Programming daily timers
Up to 50 types of daily timers can be programmed, with up to 50 times per day. Start/stop,
operation mode, temperature settings, and remote control prohibition can be programmed.
Procedure
Select 6.Auxiliary settings in the main menu and 3.Program timer in the sub menu.
1
2
6
7
8
9
3
5
4
1.Status/Control
2.Total data/Cut-off
3.Distrib. ratio/Usage
4.Maintenance/Test Run
5.Initial settings
6.Auxiliary settings
1.Zone name
2.ZoneNo./Mng.target
3.Program timer
4.Ten.Ho/TimerSp.Day
5.Prohibit R/C
6.Distribution time zone
7.Special distrib. day
8.I/D unit settings
10.WEB settings
11.User settings
9.Other settings
1
With Daily timer, select a timer number ( D1 to D50 , Holiday , Sp1 to Sp5 ).
The Holiday number is reserved for tenant holiday settings.
The timer numbers Sp1 to Sp5 are reserved for setting timer special days.
2
Touch the Set time column.
3
Select the time to set.
Main
Sub
3
3
6
6
CZ-256ESMC2_EN.indb 56CZ-256ESMC2_EN.indb 56 9/14/2011 3:17:04 PM9/14/2011 3:17:04 PM