Panasonic CZ-256ESMC2 - Page 57

55
6 Using the System
1
A window like the one shown at right appears when you touch the zone
number column.
Enter digits specify to the zone number.
* Zone No. can be registered in the range 1 to 128.
2
A window like the one shown at right appears when you touch the
management column.
Select one from among Target, Individual operation, or Not Target.
•
Individual operation:
Display, total, distribution, and individual operation are possible with
Individual units, but all-unit operations (all tenant units, all zone units,
all connected units, external all stop input, external all start input, etc.)
are not possible.
However, external all-unit alarm output and external all-unit operation
output are possible.
•
Not Target:
No operations are possible for Not Target units, including information
display (except for
Main
Sub
2
2
5
5
and
Main
Sub
2
2
6
6
), totals
calculation, and distribution.
Main
Sub
2
2
6
6
CZ-256ESMC2_EN.indb 55CZ-256ESMC2_EN.indb 55 9/14/2011 3:17:03 PM9/14/2011 3:17:03 PM