Panasonic CZ-256ESMC2 - Page 75

73
6 Using the System
For items 1 and 2, touch each input box and a soft keyboard will appear.
1 Input an optional user ID (within 20 characters).
2 Input an optional password (within 10 characters).
3 Users include three categories: “Administrator”, “Special user”, and “General user”.
No. 000 denotes “Administrator” (A special user solely admitted; its initial user ID: administrator).
No.001 or higher denotes “Special user” if authority is set to , and “General user” if authority is
set to . Depending on the user, the functions available from the Web differ as follows.
Administrator Special user General user
Tenants affected
All tenants Specifi ed tenants Specifi ed tenants
Prohibit remote control settings

Screen 3-3 Download



Screen 4-2 Alarm log

Screen 4-4 Sent mail log

Screen 6-3 Program timer

Confi rmation only
Confi rmation only
Screen 6-4 Ten.Ho/TimerSp.Day

Confi rmation only

Screen 6-5 Prohibit R/C

Confi rmation only

Screen 6-10 WEB setting

4 When touching the input box, the following small screen is displayed, where you set operatable
tenants by User ID.
6
5
7
8
9
bk
5 Register the tenant selected on the left side into the right side as the operatable tenant.
6 Delete the tenant selected on the right side from among the operatable tenants.
7 Select all the tenants on the left side.
8 Cancel this tenant setting change.
9 Make register setting for this user as the operatable tenant.
bk Select all the tenants on the right side.
Main
Sub
6
6
11
11
11
CZ-256ESMC2_EN.indb 73CZ-256ESMC2_EN.indb 73 9/14/2011 3:17:14 PM9/14/2011 3:17:14 PM